Android Auto Radio Carplay Citroen Berlingo / Peugeot Partner 2008-2019

• Android 12
• 9 inch 1024*600 touch screen (1280*720 optional V1 Plus)
• Android auto + Apple Carplay
• Quad Core 1.2 GHZ (Octa core 1.8GHZ V1 Plus) + DDR3 1GB Flash (2GB/4GB/6GB/8GB optional)
• 32GB memory (64GB/128GB/256GB optional)
• Bluetooth
• WIFI (optional 4G network V1 Plus)
• Built-in GPS
• Mirror link
• Steering wheel control
• RDS + DSP (optional)

CONTENTS OF KIT:

• Screen, custom frame, power cable, USB cable, GPS module, rear camera cable, antenna cable, CANBUS module (if the model has CANBUS), 4G antenna (V1 Plus only) and RCA wiring with card slot SIM (only V1 Plus).

V1C and V1 Pro C CANBUS CONFIGURATION

V1 PLUS CANBUS CONFIGURATION

CANBUS MODULE CONNECTION

Factory Password V1 Plus 8888/8878 V1C and V1 Pro C 000000

Password Boot logo 5678

The OCTA variants are our most economical options, they have a 4-core processor, a resolution of 1024*600, RDS, GPS connectivity, Wi-Fi, Bluetooth and wireless Android Auto & Apple CarPlay systems. These variants do not support reversing cameras with 1080P resolution.

The OCTA variants have an 8-core processor, 1280*720 HD resolution, GPS connectivity, Wi-Fi, Bluetooth, 4G (inserting a SIM card) RDS, GPS connectivity, Wi-Fi, Bluetooth, Android Auto & Apple systems Wireless CarPlay, additional RCA wiring with SIM card slot and DSP equalizer options.

CANBUS Configuration (for vehicles with CANBUS )

Make sure the CANBUS module is connected correctly:

Quad : Enter the Car Settings application, Factory section , CarType Settings , password 000000 , select canbus brand and car model

Octa : Go to Settings , Car infotainment , About device , click on the top right gear , password 8888 or 8878 , CAN Type , click on ALL and search for the car model. Once done, click on SAVE and restart the device

Steering wheel control configuration (for vehicles WITHOUT CANBUS )

Quad : Go to Car settings , General , SWC Type , leave it on Learning Type , go to Enter SWC setting interface and configure the controls to your liking

Octa : Make sure that no CANBUS configuration has been applied previously by going to Settings , Car infotainment , About device , click on the top right gear , password 8888 or 8878 , CAN Type , check that the CAN Type option is 0

After this, go to Settings , then Car Infotainment , SWC , configure the steering wheel controls by pressing the function we want on the screen and holding down the steering wheel button we want to program.

Rear Camera Connection

* THE ⓸ WIRE IS FOUND IN THE MAIN RADIO WIRING, ON SOME MODELS IT IS USUALLY LABELLED AS "REVERSE" OR "BRAKE" . IF IT IS NOT LABELLED, IT IS THE ONE MARKED IN THE NEXT PHOTO AS ⓷ .

* THE ⓸ WIRE IS FOUND IN THE MAIN RADIO WIRING, ON SOME MODELS IT IS USUALLY LABELLED AS "REVERSE" OR "BRAKE" . IF IT IS NOT LABELLED, IT IS THE ONE MARKED IN THE NEXT PHOTO AS ⓷ .

Rear Camera Settings

Quad : Enter Settings , Factory , password 000000 , Reverse Detection.

Octa : Go to Settings , Car Infotainment , About device , click on the top right gear , password 8888 or 8878 , Backup Setup , look for CamType and select the appropriate option for your camera.