Apple CarPlay
Android Auto
Give your Volkswagen, Skoda or Seat a new life
Say goodbye to the factory radio and take the leap into the future. This HD touchscreen integrates seamlessly into your car's dashboard, giving you instant access to modern technology without compromising aesthetics.
What you gain with this update:
- 📱 Total Connectivity (Wireless) : Enjoy Apple CarPlay and Android Auto without the need to connect cables.
- 🗺️ Precise GPS Navigation : Integrated GPS for use with Google Maps, Waze or your favorite map apps.
- 🎵 Superior Sound (RDS+DSP) : The digital sound processor (DSP) and RDS tuner improve the factory audio quality.
- 📞 Bluetooth Hands-Free : Crystal clear calls and uninterrupted streaming of your music (Spotify, etc.).
- 🔌 Perfect Integration : Maintains full compatibility with steering wheel controls.
⚠️ Attention! Check compatibility
-
If the radio does not turn off completely when you turn off the car and remove the key, disconnect connector 1 from connector 2 as shown in the following photo:
-
If your car's original radio has this connector, you will need the special wiring harness (click on the image):
-
If your car has a dual antenna connector, you need the Fakra dual adapter to maintain the best radio signal (click on the image):
-
If your car has an original rear camera with a 26-pin connector, you need our adapter to keep it on the new screen (click on the image):
CHOOSE YOUR MODEL
| Processor | Octa-Core |
| RAM + ROM | 2GB + 32GB |
| Interface Speed | Fluid |
| Wireless CarPlay / Android Auto | |
| Head Unit | 9 Inch IPS 1280x720 HD |
| GPS / Bluetooth / Wi-Fi | |
| Premium Sound (RDS+DSP) | |
| 4G Connection | |
| Multitasking | Basic |
| Ideal Use | CarPlay and lightweight apps |
CANBUS Configuration (for vehicles with CANBUS)
Make sure the CANBUS module is properly connected:
Quad:
Enter the Car Settings app, go to the Factory or Fábrica section, CarType Configuration, password 000000/16176699, select the CAN bus brand and car model
Octa:
Enter the Car Settings app, go to the Factory or Fábrica section, CarType Configuration, password 000000/8888, select the CAN bus brand and car model
Steering Wheel Control Configuration (for vehicles WITHOUT CANBUS)
Make sure that no CANBUS configuration has been applied previously by entering Car Settings, section Factory, or Fábrica, CarType Configuration, password 000000, check that no option is selected, then return to Car Settings, Factory or Fábrica section, Physical Key Learning and configure the controls as you wish
For models with CANBUS
- Connect the camera's yellow RCA to the screen's yellow RCA
- Connect the cable marked with 3️⃣ to 4️⃣
- Connect the cable marked with 1️⃣ to 5️⃣
For models without CANBUS
- Connect the yellow RCA from the camera to the screen's yellow RCA
- Connect the cable marked with 3️⃣ to 4️⃣
- Connect the cable marked with 1️⃣ to 5️⃣ and this connection to the reverse positive
- Connect the cable marked with 2️⃣ to the reverse negative
THE 4️⃣ CABLE IS FOUND IN THE MAIN WIRING OF THE RADIO, IN SOME MODELS IT IS OFTEN LABELED AS "REVERSE" OR "BRAKE". IF IT IS NOT LABELED, IT IS NUMBER 3 IN THE FOLLOWING PHOTO:
My touch keys have been misconfigured, how do I set them up?
Radio Learning Process:
Go to the Car Settings app on your screen.
Return to Car Settings and then to a section called Factory, Factory Settings, or Car Settings.
It will likely ask you for a password. The most common is 000000, but it could also be 8888 or 16176699.
Look for the Touch Key Learning section and configure the keys.
Step 1: Press a button on the radio screen (e.g., "Volume Up"). The button will light up or change state, indicating it is "listening".
Step 2: Immediately after, press and hold the corresponding touch button on the side of your car's screen (the actual volume up button).
Step 3: The radio will detect the signal and the screen icon will be "programmed" (usually changes color).
Step 4: Repeat this process for all the buttons you want to program (Volume Down, Mute, Next, Previous, Answer Call...).
Make sure to connect the AMP cable to the main red ACC power cable.
Go to Car Settings, the Factory section, Physical Key Learning, and configure the keys to your liking
This option is only available for models with CANBUS
First configure the CANBUS and then enter the "Can Vehicle" app to view the available original settings
Android Auto Carplay Head Unit Volkswagen Golf 5 6 Passat B6 B7 Leon Eos Touran Sharan Tiguan Scirocco Octavia Fabia
Keep full control of the steering wheel and all its functions
Connect any rear camera to park with complete safety
High-quality HD IPS touch Head Unit with custom-specific frame
Powerful 8-core processor for maximum smoothness
Enjoy full wireless connectivity with Apple CarPlay and Android Auto
View the climate control system on the screen if your car has CANBUS
Browse with complete freedom, 4G connectivity, and WiFi
