Radio Android Auto Carplay Volkswagen Touran 2011-2015

• Android 12
• Pantalla táctil 10,1 pulgadas 1024*600 (1920*720 opcional versión Octa)
• Android auto + Apple Carplay
• Quad Core 1,2 GHZ (Octa core 1.6GHZ versión Octa) + DDR3 1GB Flash (2GB/4GB/6GB/8GB opcional)
• 32 GB de memoria (64GB/128GB/256GB opcional)
• WIFI (red 4G opcional versión Octa)
• GPS Incorporado
• Mirror link 
• Control del volante
• RDS + DSP

CONTENIDO DEL KIT:

• Pantalla, marco a medida, cable de alimentación, cable USB, módulo GPS, cable cámara trasera, cable antena, módulo CANBUS (si el modelo lleva CANBUS), antena 4G (sólo versión Octa) y cableado RCA con slot para tarjetas SIM (sólo versión Octa).

The OCTA variants are our most economical options, they have a 4-core processor, a resolution of 1024*600, RDS, GPS connectivity, Wi-Fi, Bluetooth and wireless Android Auto & Apple CarPlay systems. These variants do not support reversing cameras with 1080P resolution.

The OCTA variants have an 8-core processor, 1280*720 HD resolution, GPS connectivity, Wi-Fi, Bluetooth, 4G (inserting a SIM card) RDS, GPS connectivity, Wi-Fi, Bluetooth, Android Auto & Apple systems Wireless CarPlay, additional RCA wiring with SIM card slot and DSP equalizer options.

CANBUS Configuration (for vehicles with CANBUS )

Make sure the CANBUS module is connected correctly:

Quad : Enter the Car Settings application, Factory section , CarType Settings , password 000000 , select canbus brand and car model

Octa : Go to Settings , Car infotainment , About device , click on the top right gear , password 8888 or 8878 , CAN Type , click on ALL and search for the car model. Once done, click on SAVE and restart the device

Steering wheel control configuration (for vehicles WITHOUT CANBUS )

Quad : Go to Car settings , General , SWC Type , leave it on Learning Type , go to Enter SWC setting interface and configure the controls to your liking

Octa : Make sure that no CANBUS configuration has been applied previously by going to Settings , Car infotainment , About device , click on the top right gear , password 8888 or 8878 , CAN Type , check that the CAN Type option is 0

After this, go to Settings , then Car Infotainment , SWC , configure the steering wheel controls by pressing the function we want on the screen and holding down the steering wheel button we want to program.

Rear Camera Connection

* THE ⓸ WIRE IS FOUND IN THE MAIN RADIO WIRING, ON SOME MODELS IT IS USUALLY LABELLED AS "REVERSE" OR "BRAKE" . IF IT IS NOT LABELLED, IT IS THE ONE MARKED IN THE NEXT PHOTO AS ⓷ .

* THE ⓸ WIRE IS FOUND IN THE MAIN RADIO WIRING, ON SOME MODELS IT IS USUALLY LABELLED AS "REVERSE" OR "BRAKE" . IF IT IS NOT LABELLED, IT IS THE ONE MARKED IN THE NEXT PHOTO AS ⓷ .

Rear Camera Settings

Quad : Enter Settings , Factory , password 000000 , Reverse Detection.

Octa : Go to Settings , Car Infotainment , About device , click on the top right gear , password 8888 or 8878 , Backup Setup , look for CamType and select the appropriate option for your camera.